Hilfecenter

Wissensdatenbank zu unseren Produkten für Kunden

Swaps

Swaps

A swap is an operation in which a broker closes existing positions on one date and simultaneously opens a new position on a later date at an agreed-upon price. When a swap is executed in the Daily operations section, two trades are created in the platform, which roll the position over to the next trading day:

  • A Close rollover (formed with the price from the indicator Close quote amount) trade closes the position at the end of the current day;
  • An Open rollover (formed with the price from the indicator Open quote amount) trade opens a position at the beginning of the next day.
Value dates include holidays.

According to the Interest Rates and Swap markups settings configured in Tariffs, the difference between the quoted amounts of generated trades is calculated - the Swap price.

Details on calculating the swap price are described in the Swap calculation article.

swaps_1.png

The swaps table contains the following information:

NameDescription
AccountThe account to which the position to be swapped belongs;
Instrumentthe instrument for which the swap is displayed;
AmountAmount of the instrument in the position.
From Value DateThe value date of the trade before the swap is made;
To Value DateThe value date of the trade after the swap is made;
Close rateThe closing rate of the trade for the instrument.
Open rateThe opening rate of the trade for the instrument.
Close quote amountThe calculated amount of the instrument in the transaction at the time of its closing;
Open quote amountThe calculated instrument volume in the trade at the time of opening: Closing Quote Volume - (Lots in Position * Swap Rate * Days in Swap).
Swap costswap price in quote currency: Open quote amount - Close quote amount taking into account the sign
Intraday swapDisplays Yes if the instrument is swapped intraday (usually instruments with the TOD tenor or if Intraday Swap is enabled for the account in Netting Settings).
Price (pips)The swap price in pips.
StatusSwap status. Ready means the swap is ready to be executed. Exists means the swap has already been executed. Descriptions of the remaining statuses are provided below in the article.
CommentThe likely cause of a status that prevents the swap from being made: the trade that caused the status, the holiday because of which the value dates differ from the provider, the date on which the swap was due, the missing rate. The text is displayed in English; hover over it to see it in full. Swaps in the Ready and Exists statuses show a dash.

The swaps table provides filtering by Instrument, Asset type and swap Status.

Making swaps

By clicking the Make swaps button at the top of the section, all swaps available for the selected day will be executed.

Each individual swap in the table can be canceled by clicking the Cancel swap button.

Multiple swaps can be executed or cancelled in this section by selecting them in the table and clicking the Make swaps/Cancel swap button at the bottom of the screen.

Important! When performing swaps using the arrow button in the Daily operations section, the system uses existing swap rates. When performing swaps using the Make swaps button in the row of each individual swap in the Position Trades ➝ Swaps subsection, the swap rates (Close rate and Open rate) set in the pop-up window are used. In the fields Close quote amount and Open quote amount, you can specify the quoted amount of the instrument at the time of opening and closing the swap trade. swaps_2.png
Please note! To display statuses that have already been completed, you must enable the Show existing checkbox at the top of the section.

Cancelling swaps

The Cancel swap button next to an individual swap allows you to cancel an already executed swap for a position with an instrument on the account and has the Existing status:

swaps_cancel.png

The Submit button will confirm the cancellation.

If you check the Cancel newer swaps checkbox, the platform will also cancel all the executed swaps on position in future days.

When canceling swaps on accounts with the swap type setting Open by AVP in Netting settings, created nettings and conversions are also deleted.

Bulk Operations

When you select multiple swaps using the checkboxes and click the Make Swaps button at the bottom of the screen, a sidepage will open allowing to make only the selected swaps:

swaps_bulk_execution.png

If necessary, you can set the Transaction date and time (the time of execution) in the platform and send swap information via the FIX protocol by checking the Must be sent to FIX checkbox.

After clicking the Make swaps button in the sidepage, the swaps will be made and the corresponding trades will be displayed in the platform.


When already executed (with the Existing status) swaps are selected the button Cancel swaps appears at the bottom of the screen. The button opens a similar sidepage, allowing to cancel the selected swaps:

swaps_bulk_cancel.png

By checking the 'Cancel newer swaps' checkbox, the platform will also cancel all swaps on the selected positions executed in future days.

After clicking the Cancel swaps button in the sidepage, the swaps will be canceled, and the swap trades will be deleted from the platform.

Statuses and common errors for incorrect swap processing

Below are descriptions of the statuses that prevent swaps from being processed and the day from being closed.

The Comment column of the swaps table shows the likely cause of a status (in English):

  • Second swap - the swap already made (its dates and the numbers of the Close rollover and Open rollover trades) and the position trades that this swap did not roll;
  • Overdue - the date on which the swap was due and the trades that were not rolled on that date;
  • Closed without swap - the trading day on which the swap can be made according to the instrument calendar, and the holidays in between;
  • No close rate - which rate is missing: the rate in Swap close rates or the daily closing rate of the instrument;
  • Bad rate - by how many percent the Open rate differs from the Close rate (the limit is 10%), or that the swap is copied from the swap of the provider account;
  • Wrong swap - the number of the Open rollover trade that the position starts with.

For the Second swap and Overdue statuses, the comment names the position trades that wait for the swap: the number, trade date and value date. If the value date of such a trade does not match the one calculated by the instrument calendar, the comment names the likely cause:

  • the value date is earlier than calculated - a holiday that the provider probably does not have, and where it is set: in the holiday calendar of an instrument asset or in the holiday calendar of an instrument set in the aggregator settings. If there are no holidays between the trade date and the value date - a different tenor at the provider;
  • the value date is later than calculated - the working days that the provider probably treats as holidays, and where the instrument holidays are taken from;
  • the trade date is not a trading day according to the instrument calendar.

If the trade dates match the instrument calendar, the comment says that the trade probably arrived after the swap was made (Second swap) or was not rolled on the required day (Overdue).

Overdue

The Overdue status means that the swap was not processed on a previous day, although it should have been made daily from the date it occurred. For example, if a swap is in the Overdue status on November 18, it should have been processed on November 17 and all preceding dates (excluding weekends, if applicable).

Causes:

  • Failure to process swaps on previous days (as noted above).
  • Several subsequent swaps may have been cancelled, blocking the processing of previous ones.

Important! The From value date and To value date dates for the swap must be continuous and correspond to daily processing.

Example of correct dates (for an instrument with the tenor SPOT):

Trading day - 11.11. From value date - 12.11, To value date - 13.11.

Trading day - 12.11. From value date - 13.11, To value date - 14.11.

Status adjustment:

  • Cancel later swaps, if they have already been executed, to unblock earlier ones.
  • Execute swaps in the correct chronological order, starting with the earliest date.

Second Swap

The Second swap status occurs if, after a swap has been made on an account, additional trades are added to it for the same instrument and with the same value date. As a result, the system creates a separate swap for them.

Status adjustment:

  1. Select the trading day on which the status occurred and check the Show existing checkbox to display existing swaps.
  2. Find swaps for a specific instrument that match the Amount.
  3. Cancel the found swaps.

After this, the system will generate a new swap, which can be made and subsequently closed for the day.

Note! If a new trade is opened several days before the swap execution date, existing swaps will need to be canceled up until the trade date.

Closed without swap

The Closed without swap status occurs due to incorrect value dates (including weekends and holidays) for direct trades, which prevents swaps from being calculated and executed: the position has an amount that requires a swap, but according to the instrument calendar the swap from this value date can only be made on a later trading day.

Swaps may also display this status if:

  1. The trade on the account was created on a date earlier than the account creation date;
  2. If, while there are open days on the account where the trade was created, the No holidays option is enabled in the provider's account aggregator settings, allowing trading without regard to holidays.

Status adjustment:

  1. Cancel existing swaps on the instrument before the trade date.
  2. For the case where trading is enabled without holidays, you can use one of the following options:
  • Disable the setting, perform all swaps on the instrument, then enable it;
  • Roll back all swaps on the instrument, then perform the generated swaps with the enabled setting.

If the Closed without swap and Second swap statuses persist, follow these steps:

  1. Go to the Trades section of the client account;
  2. Filter trades by the Direct type and the desired instrument;
  3. Check the trade value dates. They must match the instrument tenor:
  • TOD — T+0 (today),
  • TOM — T+1 (tomorrow),
  • SPOT — T+2 (the day after tomorrow).

When doing this, take into account holidays and weekends for the instrument (see the Schedules section). If the value date is set incorrectly and does not match the tenor, it must be adjusted manually.

After the adjustment, the swaps can be successfully made.

Also check that the settings that affect swaps match across the accounts:

  • Intraday swap in the Netting settings must be the same for client accounts and the BBook account on which their trades are executed. If it is enabled on client accounts and disabled on the BBook account (or vice versa), swaps on these accounts are due on different days, and the Second swap status appears.
  • The T+0 settlement and No holidays options in the provider account aggregator settings change trade value dates and holidays for the instrument. If they were changed while there are open days, trade value dates may no longer match the tenor. To change these options, contact the Unity team.
Request changes to these options when all previous days are closed. After the change, check the swaps on the first open day.

No close rate

The No close rate status occurs if the system has not generated a daily closing rate for the instrument. The required rate depends on the Swap type in the account's Netting settings:

  • Close by EOD and Open by avp with EOD rate - the daily closing rate of the instrument;
  • Close by market - the rate in Swap close rates.

Status adjustment:

  1. Go to the EOD Rates section and manually set the daily closing rate (the Close by EOD and Open by avp with EOD rate swap types).
  2. For the Close by market swap type - set the rate in Swap close rates.

After the adjustment, the swap can be successfully executed.

Bad rate

The Bad rate status occurs if the Open rate of the swap differs from the Close rate by more than 10%. As a rule, this means incorrect swap rates in Interest rates or incorrect swap markups in the account's Tariff. If Duplicate external swaps is enabled in the tariff, the swap is copied from the swap of the provider account.

The status adjustment is described in the Resolving swap issues article.

Wrong swap

This status is assigned to a swap that has already been made if its Open rollover trade has become the first opening trade of the position. For example, if the position type was changed during the life of the position on the account. For example, a position with the ETF asset type was created on the account, swaps were applied to it for several days, and the Convert CFD to EQ checkbox was enabled in the account's Netting settings, and the position type was changed accordingly.

A swap with this status can be cancelled, and any corresponding previously executed nettings can be deleted.

Swap cost calculations

The calculation is carried out according to the formulas described in a separate article Swap calculation.


The Save as XLSX button allows you to download the swaps table.

Sie haben nicht gefunden, wonach Sie gesucht haben? Schreiben Sie an support@unity.finance. Wir helfen Ihnen gerne rund um die Uhr